This article addresses common issues such as imported nodes failing to connect in v2rayNG on your phone, timeouts, or being connected but unable to open webpages. The checks below are ordered from easiest to follow. Work through them one by one to check your login environment, node configuration, and mobile network, and you can usually identify the cause quickly.
1. Check your current login and network environment
Many connection failures are caused not by v2rayNG itself, but by the network environment or system permissions. Start with these basic checks:
- Make sure your phone has a working internet connection: Turn off v2rayNG and open a domestic website in your browser to confirm that Wi-Fi or mobile data is working normally.
- Try switching networks: If Wi-Fi doesn’t work, switch to 4G/5G; if mobile data doesn’t work, try another Wi-Fi network to rule out restrictions from your carrier or router.
- Check your system time: An incorrect phone time or time zone can cause TLS certificate verification to fail. We recommend enabling “Set time automatically.”
- Make sure no other proxy tools are running: Clash, sing-box, and other VPNs can conflict with each other. Keep only v2rayNG running.
- Check VPN permissions: The first time you connect, Android will prompt you to authorize the VPN. Tap Allow. If you denied permission by mistake, restart the app and try again.
2. Check that the node was imported correctly
If your network environment is working, check the node configuration next. v2rayNG supports protocols such as VLESS, VMess, Trojan, and Shadowsocks. An incorrect value in any field can cause the connection to fail.
- Open v2rayNG, long-press the current node, and select “Edit.”
- Check that the address, port, UUID/password, transport protocol, TLS, SNI, path, and other fields are complete and correct.
- If you’re using a subscription, tap the menu in the top-right corner, select “Update subscription,” and then try connecting again.
- Test 2–3 different nodes rather than drawing conclusions from just one.
When getting free nodes from this site or other sources, we recommend importing them via subscription link to avoid mistakes when copying them manually. If you import a QR code manually, check that it hasn’t expired and that it belongs to the same configuration.
3. How to fix common v2rayNG errors
If you see messages such as “timeout,” “connection refused,” or “TLS handshake failed,” respond based on what the error means. A timeout usually means the node is unreachable, the network is blocking the connection, or latency is too high; try switching networks or nodes. Connection refused usually means the port or service is unavailable; for most users, switching nodes is the simplest solution. TLS handshake failed is commonly caused by incorrect SNI or TLS settings, or an incorrect system time. First correct your system time, then update your subscription.
If it shows as connected but webpages won’t open, also check the routing mode in v2rayNG. Go to “Settings” and confirm that “Bypass LAN and mainland addresses” or “Global Proxy” matches your needs. When troubleshooting, you can temporarily switch to global mode to test. If webpages load, switch back to split routing afterward.
4. Recommended troubleshooting steps
- Turn off v2rayNG and confirm that your phone can access the internet normally.
- Restart v2rayNG and make sure Android VPN permission is enabled.
- Update your subscription or scan the QR code to import the node again.
- Test different nodes on different networks.
- Check your phone’s time, TLS/SNI settings, and routing mode.
- If the problem persists, upgrade v2rayNG to the latest version, or clear the old configuration and import it again.
In short, if v2rayNG won’t connect, don’t keep tapping Connect. First determine whether the cause is your network, permissions, an expired node, or an incorrect configuration. Follow the checklist above to troubleshoot each possibility; you can usually restore the connection quickly. If multiple nodes fail on multiple networks, the subscription source or the nodes themselves most likely need to be replaced.