This guide addresses the common question, “What should I do if v2rayNG won’t connect?” It walks you through troubleshooting your phone’s network, node details, client settings, and system permissions in order—ideal for beginners getting started with V2Ray/VLESS nodes.
1. Check whether the problem is with your network
Many connection failures aren’t caused by v2rayNG itself. They may be due to network restrictions, DNS issues, or an unstable signal. Start with these basic checks:
- Close v2rayNG and open a browser to visit a domestic website. Make sure your phone can access the internet normally.
- Switch between Wi-Fi and mobile data to test the connection. Some public Wi-Fi networks, campus networks, and company networks restrict proxy connections.
- Turn Airplane mode on and off to reconnect to the network.
- If you’re using Wi-Fi, restart your router or try connecting over mobile data.
If the connection works after switching networks, the issue is most likely with the original network—not the node or client configuration.
2. Check that the node was imported correctly
Open v2rayNG, then long-press the current node to check that its configuration is complete. Common mistakes include a missing character in the address, an incorrect port, a missing UUID, or the wrong transport protocol. When using this site’s free nodes or another subscription, import them via the subscription link whenever possible to avoid errors from entering details manually.
- After importing the subscription, tap the menu in the upper-right corner and select “Update subscription.”
- Make sure the currently selected node has a check mark next to it.
- Avoid importing multiple sources and randomly switching between unfamiliar nodes. Start by testing one.
- For VLESS nodes, make sure settings such as TLS, Reality, and WebSocket match the node configuration.
If a node has expired, been blocked, or its server is unavailable, v2rayNG may keep showing a connection failure, or connect but fail to access the internet.
3. Check the v2rayNG client settings
Beginners should start with the default settings and avoid changing routing rules or local ports without a reason. In v2rayNG’s settings, check the following:
- Try turning “Enable local DNS” on or off and test the connection both ways.
- For “Routing mode,” start with Global or Bypass LAN and Mainland addresses.
- Make sure you’ve granted the VPN permission requested by your phone.
- If the connection button shows that you’re connected but webpages won’t load, try switching nodes or clearing the app cache.
Note: Android can only run one VPN app at a time. Close any other accelerator, proxy tool, or ad-blocking VPN first to avoid conflicts.
4. Check the logs to identify the likely cause
You can view the logs from the menu in the upper-right corner of v2rayNG. You don’t need to understand everything—just look for key terms. For example, “timeout” usually points to a network issue or an unreachable node; “failed to dial” may mean the address, port, or transport method isn’t working; and errors mentioning “certificate” or “TLS” usually indicate a mismatch in the security settings.
Try troubleshooting in this order: switch networks, update the subscription, try another node, and reinstall the client as a last resort. Don’t start by changing advanced settings at random, or it will be harder to pinpoint the cause.
5. What if it still won’t connect?
If none of the nodes work, uninstall the old version of v2rayNG, reinstall the latest client, and then import the subscription again. If only one node fails, that node is most likely unavailable. Free nodes may be affected by your network environment and the node’s status, so it’s a good idea to keep several alternatives available.
In short, if v2rayNG won’t connect, first make sure your phone’s network is working, then check your subscription and node settings, and finally review the client’s permissions and routing settings. Following these steps should help you quickly determine whether the problem is with your network, the node, or the configuration.