This article addresses the common question, “What should I do if v2rayNG won’t connect?” It’s designed to help beginners troubleshoot step by step, checking everything from the phone’s network and node details to proxy mode and system settings, so you can quickly determine whether the issue is with your local network, an unavailable node, or an incorrect client configuration.
1. First, check that your phone’s network is working properly
Many connection failures aren’t caused by v2rayNG itself. They may result from network restrictions, DNS issues, or a network switch. Before reinstalling the client, work through these checks in order:
- Close v2rayNG and open a browser to visit a domestic website. Check that your phone can access the internet normally.
- Switch between Wi-Fi and mobile data to test the connection. If mobile data works but Wi-Fi doesn’t, the current Wi-Fi network may be restricted.
- Turn Airplane mode off and back on to reconnect to the network.
- If you’re using a campus network, office network, or public Wi-Fi, complete the web login authentication before connecting with v2rayNG.
- Check that your phone’s date and time are correct. We recommend enabling “Set time automatically.” An incorrect time can cause a TLS handshake to fail.
If you can’t access domestic websites either, fix your phone’s network first. If they work but v2rayNG doesn’t, continue troubleshooting the node and configuration.
2. Check whether the node is unavailable or was imported incorrectly
The most common reasons v2rayNG won’t connect are an expired node, an unavailable server, or an outdated subscription. If you’re using free nodes from this site or another source, update your subscription or try a different node first, since free-node availability can change over time.
- Open v2rayNG, tap the menu in the upper-right corner, and select “Update subscription.”
- After updating, don’t test just one node. Try two or three different nodes in succession.
- Confirm that v2rayNG supports the node’s protocol, such as VMess, VLESS, or Trojan.
- If you imported a link manually, make sure it’s complete and that its prefix, such as vmess:// or vless://, hasn’t been omitted.
We recommend using the “Test all configurations for real connection” feature to check the results. If you see a timeout, TLS error, EOF, or similar message, the problem is most likely related to the node’s status, network environment, or transport parameters.
3. Check v2rayNG’s basic settings
If the node is working but you still can’t access websites, check the client settings. Beginners should leave the default settings in place and avoid changing advanced parameters unnecessarily.
- Tap the node you want to use and make sure it’s selected, with a check mark beside it.
- Tap the circular button in the lower-right corner to connect. A VPN icon should appear in the status bar.
- Go to “Settings.” For the routing mode, start with “Bypass LAN and mainland addresses” or the default rules.
- If no websites will open, try switching to “Global proxy” to test. If that works, switch back to rule-based mode.
- Turn off any other VPNs, proxies, or network accelerators on your phone to prevent conflicts with v2rayNG.
If the system prompts you to grant VPN permission, you must tap Allow. Some Android systems also restrict background activity, so allow v2rayNG to run in the background in your battery settings.
4. Use the error symptoms to identify the cause
Different symptoms point to different troubleshooting steps. If the app stays on “Connecting,” the network most likely can’t reach the node. If it disconnects quickly, the configuration parameters may be incorrect. If it connects but websites won’t open, the issue may be related to DNS, routing, or your browser’s proxy cache.
- Real connection test times out: Switch networks, try another node, and update your subscription.
- TLS handshake failed: Check your phone’s time and try a node with working TLS support.
- Connected, but websites won’t open: Switch to Global proxy, clear your browser cache, and try a different DNS.
- Only some apps bypass the proxy: Check the per-app proxy settings and make sure the app hasn’t been excluded.
Finally, if your phone’s network is working, your subscription is up to date, and multiple nodes have failed, take a screenshot of the key messages in the error log and use them to continue troubleshooting. As a beginner, remember this rule: switch networks first, try another node next, and change settings last. This helps keep things from getting more confusing.