This article addresses the question “What should I do if v2rayNG won’t connect?” If you can’t access websites after importing a node, or you see timeouts, TLS handshake failures, or find that only some apps work, follow the checks below in order. Checking your IP, DNS, proxy mode, and browser environment can help pinpoint most common issues.
1. Check the node and client status first
After opening v2rayNG, don’t keep switching nodes at random. Instead, troubleshoot step by step. Connection failures often aren’t caused by a problem with your phone; the node may be down, the subscription may be out of date, your device’s clock may be incorrect, or you may have selected the wrong proxy mode.
- Open v2rayNG and tap the subscription update button in the upper-right corner. Make sure your node list is up to date. This site also offers free nodes that you can import, but free resources may be unreliable, so it’s a good idea to have a few alternatives ready.
- Select a node and tap the connect button in the lower-right corner. Check that the VPN icon appears in the status bar.
- Long-press the node and select “Test current service connection” or a similar test option. If all tests time out, try another node first.
- Check your phone’s date, time, and time zone. A significant clock error can cause certificate verification to fail.
If the latency test succeeds but webpages won’t load, the issue is usually not with the node itself, but with DNS, routing, or your browser’s proxy environment.
2. How IP, DNS, and routing modes affect your connection
Once v2rayNG connects, accessing websites involves your local IP address, the remote exit IP, and DNS resolution. If DNS requests still go through your local network, domains may be blocked or resolve to the wrong address, making it seem like you’re “connected but unable to browse.”
- IP issues: Some nodes’ exit IPs may be blocked by the target website. Try another node using the same protocol but in a different region.
- DNS issues: Enable remote DNS in v2rayNG’s settings or use its built-in DNS configuration to avoid interference from local DNS.
- Routing issues: If you’re only proxying blocked websites, some apps may fail when connecting directly. Temporarily switch to global proxy mode to test.
- Try both mobile data and Wi-Fi to rule out interference from your carrier or router.
For a quick test, switch to “Global Proxy” and check whether websites load, then switch back to a commonly used mode such as “Bypass LAN and Mainland China addresses.” If global proxy works but rule-based mode doesn’t, the cause is most likely your routing rules or DNS settings.
3. Your browser environment can also make it look like you can’t connect
Sometimes v2rayNG is working correctly, but browser cache, privacy extensions, or leftover system proxy settings can still cause errors. Try the following:
- Close and reopen your browser, or test with another browser such as Chrome, Firefox, or Edge.
- Clear the target website’s cache and cookies to prevent saved location data from affecting access.
- Disable any built-in browser proxy extensions to avoid conflicts with v2rayNG’s VPN mode.
- Visit an IP lookup website to confirm whether your exit location has changed.
If only one website won’t open while others work, v2rayNG is probably not experiencing a general failure. The website may be blocking your exit IP, have a certificate issue, or be affected by browser cache.
4. Quick checklist if you still can’t connect
- Import your subscription again to make sure no characters were missed when copying the node details.
- Update v2rayNG to the latest version. Older versions may not be compatible with some VLESS, Reality, or TLS configurations.
- Turn off battery-saving mode and allow v2rayNG to run in the background.
- Delete the current node and import it again to remove any leftover settings.
- Restart your phone, then test both Wi-Fi and mobile data.
In summary, if v2rayNG won’t connect, first test whether the node is working, then check DNS and routing, and finally troubleshoot your browser environment. Following the order “node—network—DNS—browser” is more effective than changing apps at random.