This article addresses the question “how to configure a WS TLS node“: you’ll learn which key parameters a WS+TLS node requires in clients such as V2RayN, Clash Verge, and sing-box, how to import a subscription, and how to troubleshoot connection failures from three angles: IP, DNS, and browser environment.
1. First, understand what information a WS TLS node needs
WS TLS is commonly used with protocols such as VLESS and VMess. Put simply, it disguises proxy traffic as HTTPS website access. Ordinary users do not need to handwrite complex configurations, but you do need to make sure the node information is complete; otherwise, it may still fail to connect after import.
- Address: usually a domain name, though it can also be an IP; for WS+TLS, a domain name is generally recommended.
- Port: commonly 443, though it may also be another port specified by the service provider.
- User ID / UUID: required for VLESS and VMess nodes.
- Network: should be set to ws or websocket.
- TLS: must be enabled; SNI is usually set to the node’s domain name.
- WS Path: for example, /ray, /ws, /api, etc.; it must match the information provided for the node.
- Host: in some clients this is called the spoofed domain or request header Host; it is usually set to the node’s domain name.
If you are using the free nodes provided by this site, it is recommended to import them via a subscription link first to reduce the chance of manually entering Path, SNI, or Host incorrectly.
2. Steps for importing the configuration into a client
Different clients have different interfaces, but the general approach is basically the same. Just follow the common process below.
- Copy the node link or subscription link, such as a vless://, vmess://, or Clash subscription address.
- Open the client: on Windows, you can use V2RayN or Clash Verge; on Android, v2rayNG or Clash Meta; on iOS, a client that supports sing-box/Clash.
- Select “Import from clipboard” or “Add subscription,” then paste the link and update the subscription.
- Open the node details and confirm that the transport type is ws, TLS is enabled, and SNI, Host, and Path are not missing or garbled.
- Select the node, enable system proxy or VPN mode, and then visit a test website.
If you are adding it manually, focus on checking three things: do not omit the slash in the WS Path, keep SNI and Host consistent with the node domain name whenever possible, and make sure TLS is enabled.
3. Why IP, DNS, and browser environment can affect the connection
A WS TLS node may look like it is only a matter of client parameters, but in practice it is also affected by the local network environment. First is the IP environment: some networks restrict specific ports or routes. If your home broadband cannot connect, try a mobile hotspot, switching Wi-Fi, or changing the node.
Second is DNS: if domain resolution is abnormal and the client connects to the wrong address, you may see timeouts or TLS handshake failures. It is recommended to change the system or client DNS to a reliable public DNS, and enable remote DNS or fake-ip/rule mode in the client to avoid local DNS pollution.
Third is the browser environment: if the connection succeeds but webpages still will not open, the browser may still be using a direct connection, a proxy extension may be conflicting, or old DNS may be cached. You can first disable other proxy extensions, test in an incognito window, or enable “system proxy” in the client.
4. Quick troubleshooting checklist for connection failures
- If you see timeout: switch networks, switch nodes, and check whether the port is being blocked.
- If you see TLS handshake failed: check TLS, SNI, and whether the system time is correct.
- If you see 404 or bad request: it is most likely that WS Path or Host was entered incorrectly.
- If the client shows connected but you still cannot access the internet: check the system proxy, routing mode, and DNS settings.
- If the subscription update fails: make sure the subscription address is accessible, or try again later.
In summary, the core of WS TLS configuration is not “filling in lots of parameters,” but ensuring that domain name, TLS, SNI, Host, and Path all match each other. Use subscription import first whenever possible, then troubleshoot from the three directions of IP, DNS, and browser, and you can usually identify most connection problems.