What should you do if v2rayNG won’t connect? This guide walks you through troubleshooting in the following order: local network, VPN permissions, node configuration, DNS, and logs. It covers issues such as no internet access after tapping Start, node tests timing out, or some apps failing to open. You don’t need to change anything on the server. First narrow down the cause, then adjust settings one at a time to avoid making things worse.
1. First, check whether the problem is with your current network
Turn off v2rayNG first, then check whether your regular internet connection works. Try opening a website that normally works without a proxy. If it won’t load either, first check for a Wi-Fi sign-in requirement, an issue with your mobile data plan, or a router outage. Public Wi-Fi may require you to sign in through a browser before you can connect; the proxy usually won’t work until you do.
- Turn off the proxy and check your direct internet connection in a browser and other apps.
- Switch between Wi-Fi and mobile data, then test the same node again. Keep in mind that mobile data usage may apply.
- If the problem occurs only on one Wi-Fi network, reconnect to it and, if needed, restart your home router. Don’t reset your phone’s network settings right away.
- Set your phone’s date, time, and time zone to automatic. An incorrect time can cause TLS certificate validation to fail.
If switching networks fixes the problem, it’s more likely related to restrictions on the original network or the connection route—not a damaged client.
2. Check VPN permissions and system restrictions
When starting v2rayNG, accept Android’s VPN connection request. Open your system’s VPN settings and check that no other VPN, proxy booster, or ad blocker that uses a local VPN is occupying the connection. Menu names vary between phones; try searching Settings for “VPN.”
The VPN icon means only that the tunnel is active; it doesn’t mean the node is working. If the connection drops immediately after startup, check background activity and battery optimization restrictions. If you still can’t connect directly after turning off v2rayNG, check whether “Always-on VPN” or “Block connections without VPN” is enabled. You can temporarily turn these off while troubleshooting, then restore them if needed.
3. Check that the node and subscription are valid
- Make sure the node you want to test is selected, then run the connection test provided by the client. The test option may be in a different place depending on the version.
- Update the subscription and check whether the update is reported as successful. A failed update doesn’t mean all your existing nodes are invalid; the subscription URL itself may simply be inaccessible at the moment.
- Compare the results with another node from a trusted source. If the same node fails on two different networks while other nodes work, check that node first.
- If you imported the node manually, verify the address, port, user ID, transport method, and TLS-related fields. If possible, reimport the full link rather than changing settings based on guesswork.
If you’re using a free node from this site, judge it by the actual connection results; public nodes may be unavailable or congested. Don’t post your subscription link, full node link, or user ID in public comments.
4. What to check if you’re connected but websites won’t open
First check the routing mode and per-app proxy settings, and make sure your browser isn’t excluded from the proxy. You can temporarily switch to global proxy mode for comparison. If that works, switch back and adjust your routing rules; if only certain apps have problems, focus on the proxy scope for those apps.
If the logs show a domain resolution failure, check the client’s DNS settings and whether Android’s “Private DNS” is set to an unavailable custom address. You can temporarily switch back to automatic settings and test again. Don’t change several settings at once.
A timeout in the logs usually indicates a connection timeout; compare results across networks and nodes to narrow down the cause. A certificate or TLS error means you should check the system time and configuration. Change only one setting at a time, and record the result. If the problem persists, provide the client version, network type, and a redacted excerpt of the error so the issue can be investigated further.