This guide addresses the questions “How do I configure a WS TLS node, and why can’t I connect after importing it?” It explains how to check the address, port, WebSocket path, and TLS domain, and how to distinguish issues caused by the IP, DNS, or browser environment. It applies to v2rayN, Clash-compatible clients, and sing-box GUI clients that support the relevant protocols. Menu names may vary by version.
1. Understand the difference between WS, TLS, and node protocols
WS refers to WebSocket transport, while TLS encrypts the connection. Neither is a complete node protocol; they must be used with a protocol such as VLESS, VMess, or Trojan. The words “WS TLS” alone are not enough to create a working node—you need the complete link, subscription, or parameters provided by the node provider.
You typically need the server address, port, user ID or password, the ws transport, the Path, Host, and the TLS server name (SNI). Host and SNI may be the same or different. Enter them as specified in the original configuration; do not guess based on the server IP.
2. Import first, or check each setting when configuring manually
- Install the appropriate version for your system from the client’s official release channel, and confirm that it supports the node protocol. If you already have the client installed, update it first and back up your existing configuration.
- Copy the complete node link and select “Import from clipboard” in the client. If you have a subscription URL, go to “Subscription Management,” add it, and update it. Do not paste the subscription URL into the server address field.
- Open the node editor and check the protocol, address, port, and authentication details. Select WebSocket as the transport, and keep the leading slash and any existing parameters in the path—for example, /example. A sample path is not a substitute for the actual path.
- Enable TLS and enter the SNI and WS Host provided by the provider. Keep certificate verification enabled; do not mask configuration errors by selecting “Skip verification.” Leave optional settings such as ALPN at their defaults unless explicitly instructed otherwise.
- Save and select the node, enable the system proxy, and first test a webpage in rule mode. If an application does not follow the system proxy, consider using the client’s TUN mode, if supported, and meet its permission requirements.
Import free nodes from this site or other sources using their original parameters. Subscriptions may contain access credentials, so do not share complete links publicly. Configuration formats are not necessarily interchangeable between clients.
3. What IP, DNS, and the browser affect
The server address determines where the client connects; the exit IP is the proxy IP seen by websites. They are not necessarily the same. Do not enter the exit IP you looked up as the node address. If the provider specifies an IP as the connection address, a separate domain SNI may still be required for certificate verification.
DNS translates domain names into IP addresses. If the log shows “domain name resolution failed,” first confirm that your local network can access the internet, then check the client’s DNS settings. Secure DNS in the browser may use a different resolution path from the system or client. Adjust it according to the client’s documentation, rather than repeatedly changing settings at random.
Browser extensions, separate proxy settings, and cached data can affect how webpages behave, but they generally do not change the node’s WS parameters. Try an incognito window to rule out some cache and extension issues, and check whether the browser is using a different proxy.
4. Troubleshoot connection failures by error type
- Connection timeout: Check the address, port, and node status, then test using a different local network.
- TLS certificate error: Check the system clock, SNI, and certificate verification settings. Do not simply disable verification.
- WebSocket handshake failure: Check the Path, Host, and transport type carefully.
- The node connects, but webpages do not load: Check the system proxy, routing rules, and DNS, then review the client logs.
Change one setting at a time and retest to help identify the cause. If you need help, include the client version and sanitized logs, and hide your password, user ID, and subscription token.