This guide explains how to configure a WS TLS node and why the same node may behave differently across networks, DNS settings, or browser environments. It’s intended for everyday users of clients such as V2RayN, Clash Verge, and sing-box, with a focus on importing nodes, checking settings, and troubleshooting connection failures. It does not cover setting up your own server.
1. Key details required for a WS TLS node
WS TLS typically refers to WebSocket transport secured with TLS. It’s commonly used with VMess, VLESS, and Trojan nodes. After you import a node link or subscription, the client will automatically detect most settings. If you need to enter them manually, check the following carefully:
- Address: Usually a domain name, but it may also be an IP address. Use the domain provided by the service if possible.
- Port: Often 443, but use the value specified in the node details.
- UUID or password: Used for authentication. Make sure there are no extra spaces or missing characters.
- Transport: Select ws or websocket.
- Path: For example, /xxx. It must match the node details exactly.
- TLS: Enable it and enter the SNI or Server Name.
- Host: Enter this in the WS Header in some clients. It usually matches the domain name.
If you copy a subscription from the free nodes page on this site, import it using the subscription option first. Avoid changing settings manually at the outset to prevent errors in the path, SNI, or Host.
2. Importing and configuring a client
Names may vary slightly between clients, but the general process is much the same. Here’s a typical workflow:
- Install a client: On Windows, you can use V2RayN or Clash Verge; on Android, v2rayNG or NekoBox; and on iOS, commonly Shadowrocket, Stash, or a sing-box client.
- Copy the subscription link or an individual node link, then open the client and select “Subscription,” “Import from Clipboard,” or “Add Configuration.”
- Update the subscription, select a WS TLS node, and check that TLS is enabled and the transport is set to ws.
- Set up the system proxy or enable VPN mode. On a computer, this is usually done by selecting “System Proxy”; on a phone, you can generally just tap Connect.
- Open a browser and visit a familiar test website to check that it loads normally.
When configuring a node manually, the settings most likely to be entered incorrectly are Path, SNI, and Host. The path is case-sensitive, including its slashes. SNI is usually the node’s domain name. If the node details provide a separate Host value, enter it as given.
3. Can IP, DNS, or the browser environment affect the connection?
Yes. WS TLS nodes may seem to involve only client settings, but the local network environment can also affect the connection.
First, there’s the IP address. Some networks have unstable connections to certain overseas IP ranges, resulting in high latency, failed handshakes, or intermittent connectivity. This doesn’t necessarily mean the node is misconfigured. Try switching networks, such as testing over mobile data instead of Wi-Fi.
Next, there’s DNS. If domain resolution fails, the client may connect to the wrong address or be unable to resolve the domain. Try enabling remote DNS or DoH in the client, or use the DNS settings recommended by the client. Avoid frequently mixing system, router, and browser secure DNS settings, as this can make troubleshooting more complicated.
Browser settings can also lead to misleading results. Browser caches, extensions, and proxy add-ons may override the system proxy. Try testing in a private window and temporarily disable other proxy extensions. If the client shows that it’s connected but webpages won’t load, first check whether the browser is using the correct proxy.
4. Quick checklist for troubleshooting connection failures
- Make sure the node hasn’t expired and the subscription is up to date.
- Check that TLS is enabled and the port matches the node details.
- Verify the WS path, SNI, and Host, and make sure there are no extra spaces.
- Try another node from the same subscription to determine whether the problem is with one node or your local environment.
- Disable browser proxy extensions and re-enable the client’s system proxy.
- Test on a different network to rule out ISP routing or router DNS issues.
In short, when configuring a WS TLS node, first make sure it has been imported correctly, then check for issues related to your IP, DNS, and browser environment. For everyday users, importing via subscription and making as few manual changes as possible is usually the safest approach.