This guide addresses the practical question “How do I import a subscription into Clash?” It walks you through getting a subscription link, importing it into the client, updating the configuration, and checking whether your IP, DNS, and browser settings are working properly. Follow the steps to configure your connection and troubleshoot common causes of connection failures.
1. What to prepare before importing a subscription
Clash is only a client; it cannot connect to the internet on its own. You need working nodes or a subscription link, which is usually a URL containing configurations for multiple nodes. You can use a subscription you already have or refer to the free node information on this site. Keep in mind that free nodes may stop working or become congested, so if you run into problems, try switching nodes first.
- Make sure you have installed Clash Verge, Clash for Windows, Clash Meta, or a similar client.
- Have a complete subscription link ready. It usually starts with http or https.
- Make sure your computer can access websites and that its system clock is set correctly.
2. General steps for importing a subscription into Clash
- Open the Clash client and find Profiles, Configuration, Subscription, or a similar section.
- Click New, Import, Import from URL, or Add Subscription.
- Paste in the subscription link. Enter a name such as “Free Nodes,” or choose your own.
- Save, then click Update or Update Subscription and wait for the client to download the configuration.
- Go to the Proxies or Nodes page and select a node.
- Enable System Proxy. If the client offers TUN mode, you can enable it as needed.
If the download fails, first check that you copied the entire subscription link, especially any parameters at the end. Some subscription links can only be accessed after logging in through a browser, so they may not work when imported directly into Clash.
3. Why check your IP, DNS, and browser settings after importing?
A successful subscription import does not mean all your traffic is using the proxy. Visit an IP-checking site to check your outgoing IP. If the country or region shown matches your selected node, the proxy is probably working. If your IP has not changed, the most common causes are System Proxy being disabled, the browser being set to connect directly, or the rules not matching the website you are trying to access.
DNS can also affect your browsing experience. If some websites will not load, the issue may not be the node; DNS lookups may be corrupted or resolving to the wrong address. Try switching Clash to Rule or Global mode. If Global mode works but Rule mode does not, you may need to adjust your rules or DNS policy.
Browser settings matter, too. Chrome, Edge, and Firefox may have proxy extensions, privacy extensions, or DoH settings that prevent them from fully following the system proxy. To troubleshoot, try an incognito window or temporarily disable proxy-related extensions. If only one browser has the problem, check its proxy settings, DNS over HTTPS, cache, and extensions.
4. Common troubleshooting checklist
- Subscription update failed: Check whether the link has expired, requires a login, or can be reached over your network.
- All nodes show red or time out: Try another node or network, or try again later. Free nodes often stop working.
- Connected, but websites will not load: Switch to Global mode to test, then check DNS and rules.
- Some websites will not load: Try a node in another region, clear your browser cache, and disable any suspicious extensions.
- Works on your phone but not your computer: Check your computer’s firewall, security software, and system proxy settings.
In summary, importing a subscription into Clash comes down to “add the URL, update the configuration, select a node, and enable the proxy.” Then check your IP, DNS, and browser settings to make sure everything is working. If your connection fails, don’t focus only on the node—work through the checklist above to find the cause quickly.