This article addresses the common question, “What should I do if v2rayNG won’t connect?” Whether you can’t access the internet after importing a free node, adding a subscription link, or manually adding a VLESS/VMess node, use the checklist below to troubleshoot step by step and quickly identify whether the issue lies with your phone’s network, node details, subscription updates, or client settings.
1. Check your phone’s network and permissions
Many connection failures aren’t caused by a faulty node, but by network or permission issues on your phone. First, check the following:
- Make sure your phone’s current network is working: Turn off v2rayNG and open a domestic website in your browser to confirm that your Wi-Fi or mobile data is working properly.
- Try switching networks: If Wi-Fi doesn’t work, switch to mobile data; if mobile data fails, try Wi-Fi to rule out restrictions from your carrier or router.
- Turn off other proxies or VPNs: Don’t run multiple VPNs, accelerators, or system proxies at the same time, as this can cause routing conflicts.
- Check your system time: An incorrect time or time zone can cause TLS certificate verification to fail. We recommend enabling automatic time settings.
- Allow VPN access: The first time you connect, Android will prompt you to allow the VPN connection. You must tap Allow.
If these basic settings are all in order, continue troubleshooting your node and app settings.
2. Check that the node and subscription are valid
Common v2rayNG errors such as timeouts, TLS handshake failed, and connection refused are often related to node details. Try the following in order:
- Open v2rayNG, long-press the current node, and select “Test current service status” or “Test latency.” If it keeps timing out, try another node.
- If you’re using a subscription link, tap the menu in the top-right corner and select “Update subscription.” An expired subscription or an incomplete link can cause connection failures.
- Make sure the node’s protocol settings match. Don’t change the port, UUID, transport method, or TLS settings for VLESS, VMess, or Trojan nodes without a reason.
- Free nodes provided by this site may stop working as network conditions change. After importing them, test several nodes instead of relying on a single connection.
Most importantly, don’t change node parameters unless you understand what they do, especially the address, port, UUID, SNI, and transport protocol.
3. Troubleshoot v2rayNG client settings
If the node works on someone else’s phone but not yours, check the client itself. First, update to a newer version of v2rayNG, as older versions may not support certain newer protocols or transport methods. Then open Settings and make sure you haven’t mistakenly selected a routing mode that blocks all traffic. Most users can start with the default routing mode or bypass LAN and mainland China addresses.
You can also try clearing the app cache, closing and reopening the app, or deleting old nodes and reimporting the subscription. If you’ve imported a lot of configurations, keep the subscription link and remove invalid nodes to avoid selecting an outdated connection.
4. What to do if you’re connected but websites won’t open
Sometimes v2rayNG shows as connected, but websites still won’t open. Try visiting a simple website first, then check whether your browser has an additional proxy configured. Some apps don’t use the system VPN, so you may need to restart the app or your phone. You can also check the v2rayNG logs. If you repeatedly see messages such as DNS, timeout, or reset, the current node is usually unstable or being disrupted by your network environment.
We recommend troubleshooting in this order: network environment → client permissions → subscription update → try another node → check the logs. This is the most efficient approach and helps avoid assuming that all nodes have stopped working. If you run into an issue, save a screenshot of the error message and check each item in the list above. This should help you identify most causes of v2rayNG connection failures.