This guide addresses a common question: “Why can’t I connect to free nodes?” You may have imported nodes into V2Ray, Clash, or sing-box, yet still get timeouts, be unable to open web pages, or find that only some websites are accessible. Often, the node itself isn’t the only possible cause—your local IP, DNS, or browser proxy settings may also be involved.
1. First, determine whether the problem is with the node or your local environment
Free nodes are often used by many people, so occasional congestion, blocking, or configuration changes are to be expected. But if you can’t connect to multiple nodes, check your client and network environment first. Troubleshoot in the order below rather than repeatedly reinstalling the software right away.
- Make sure the client’s system proxy or TUN mode is enabled. If proxying isn’t enabled in Clash or sing-box, the node may appear connected even though you can’t access the internet.
- Check that the subscription updated successfully and that the node address, port, UUID, and protocol type are all present.
- Test 2–3 nodes in different regions so you don’t base your diagnosis on a single node.
- Close any other VPNs, accelerators, or proxy extensions on your computer or phone to prevent port conflicts.
If the free nodes page on this site shows an update date, recopy the subscription or node details first, then click Update Subscription in your client to avoid using an outdated cache.
2. Your IP environment can affect connection success
The same free node may work for some people but not others. One common reason is that their local public IP environments differ. Campus networks, company networks, hotel Wi-Fi, and some mobile networks may restrict nonstandard ports or proxy connections. Home broadband and mobile hotspots can also behave differently.
Try this test: if the node fails over your current Wi-Fi, switch to a mobile hotspot and try again. If it works on the hotspot, the node may be fine—the original network may be restricting the connection. Conversely, if it fails on every network, consider whether the node is offline or the client is misconfigured.
Some clients also retain old connection states. After switching networks, disconnect from the node, wait a few seconds, and reconnect. Restart the client if needed. Avoid clicking Connect repeatedly in quick succession, as this can fill the logs with timeouts and make the problem harder to diagnose.
3. Incorrect DNS settings can also cause a connection that works but won’t load pages
Many users assume that if the client says it’s connected, they should be able to access websites. In reality, DNS resolution problems can cause the browser to spin endlessly, display a DNS_PROBE error, or fail to open some websites. In this case, focus on checking whether DNS is being bypassed by the system or browser.
- Clash users: Check that DNS is enabled and that common domains are routed through the proxy in rule mode.
- sing-box users: Make sure the DNS settings in your configuration match the inbound proxy, so that DNS queries aren’t left unproxied while other traffic is routed through the proxy.
- V2RayN users: Try enabling “Allow connections from LAN” and the system proxy, then test your browser.
- Browser users: Disable Secure DNS, DoH, or proxy extensions to prevent them from conflicting with the client.
If websites won’t open in your browser but Telegram, the app store, or other software works, the issue is likely with your browser proxy or DNS settings rather than the node being entirely unavailable.
4. Your browser environment can also prevent free nodes from connecting
Browser extensions, cache, and fingerprinting settings can all affect access. This is especially common for users who have installed proxy extensions, ad blockers, or privacy extensions, as the browser may still be using an old proxy port. Try testing in an incognito window or a clean browser.
The steps are simple: first, disable proxy extensions; clear the cache for the site you’re trying to access; open an incognito window; and make sure the system proxy port matches the one shown in the client. The common local port for Clash is 7890, but this may vary by version, so check the client. Most importantly, don’t run multiple proxy tools at the same time.
5. If you still can’t connect, check the logs to identify the cause
Open the client logs and look for these keywords: “timeout” usually indicates a network issue or a congested node; “connection refused” may indicate a port issue or an offline node; “TLS handshake failed” may indicate mismatched protocol parameters; and “no route” or “dns failed” is usually related to routing rules or DNS. Trying a different node, network, or DNS based on the logs is usually more effective than reinstalling the software without a clear reason.
In short, if a free node won’t connect, the node itself isn’t necessarily the problem. Troubleshoot in this order: update the node, check your IP network, DNS, browser environment, and client logs. This will help you find the cause faster. If you need to test your setup, you can use the free nodes listed on this site, but it’s a good idea to have several backups in case one node is unavailable.