This guide explains “how to configure a WS TLS node” and why the same node can behave differently across networks, DNS settings, and browser environments. It’s for everyday users who have a V2Ray/VLESS/VMess ws+tls node but aren’t sure which parameters to enter or how to troubleshoot connection failures.
1. Which parameters should you check for a WS TLS node?
WS stands for WebSocket, and TLS provides encrypted transport. Node details commonly include the address, port, user ID, transport protocol, path, and Host/SNI. When you import a subscription, the client will usually detect these automatically. If you’re adding a node manually, check each field carefully.
- Address: This may be a domain name or an IP address. WS TLS nodes more commonly use a domain name.
- Port: 443 is common, but use the port specified in the node details.
- Path: For example, /abc or /ray. It must match exactly, including the leading slash.
- Host/SNI: Usually, enter the node’s domain name. If a separate value is provided, use that instead.
- TLS: Must be enabled. Skipping certificate verification is generally not recommended unless the node instructions require it.
2. Configuration examples for Clash / sing-box / V2Ray clients
The easiest option is to use a subscription link. This site compiles information about available free nodes. You can copy a subscription or single-node link as instructed on the page, but free nodes may vary in reliability depending on your network, so it’s a good idea to have a few alternatives ready.
- Install a client: On Windows, you can use Clash Verge or v2rayN; on Android, v2rayNG or Clash Meta; on iOS, a client that supports sing-box or Clash configurations.
- Import the subscription: Find “Subscriptions,” “Configuration,” or “Profiles,” paste the subscription link, and update it.
- To add a node manually, select the VMess or VLESS protocol, set the transport to ws, and enable tls for the security layer.
- Enter the address, port, UUID/ID, Path, Host, and SNI. Save the settings and test the latency.
- Select a node, enable system proxy or VPN mode, then open a browser and visit a test website.
3. How do IP, DNS, and browser settings affect the connection?
Many people assume a node’s configuration alone determines whether it works, but your local IP, DNS, and browser can also affect the connection. If your ISP’s network has trouble resolving certain domains, the client may connect to the wrong IP. If your browser uses its own secure DNS, websites may fail to load even though the client shows that it’s connected.
First, set the client’s DNS to automatic or a commonly used public DNS, then test again. If you use Clash, check whether the DNS module is enabled and whether fake-ip conflicts with software on your device. In your browser, disable proxy extensions, privacy extensions, and built-in secure DNS first to prevent double proxying from routing the connection indirectly.
4. Connection troubleshooting checklist
- TLS handshake failed: Check that the SNI, Host, and system time are correct.
- Connection timed out: Switch networks, such as between Wi-Fi and mobile data, or try a different node address.
- Connected, but websites won’t load: Check your system proxy, browser proxy, and DNS settings.
- Subscription update failed: Make sure there are no extra spaces in the subscription link, and try updating with the proxy disabled.
- Only some websites won’t load: Clear your browser cache, disable DoH/secure DNS, and try again.
In short, the key to configuring WS TLS is to select the correct protocol, enable TLS, and enter the Path/Host/SNI correctly. If the connection still fails, check your IP network, DNS resolution, and browser settings one by one. This will usually help you pinpoint the problem.