This article addresses the common question “What should I do if v2rayNG won’t connect?” It focuses on troubleshooting node status, mobile network, IP, DNS, and browser environment issues. It’s intended for users who have already imported V2Ray/VLESS/VMess nodes but can’t access web pages normally.
1. First, check that the node and basic settings are correct
Many connection failures aren’t caused by a faulty client. The node may have expired, the subscription may not have been updated, or some settings may not have imported correctly. After opening v2rayNG, check the following:
- Open v2rayNG, tap the menu in the upper-right corner, select “Update subscription,” and wait for the update to complete.
- Switch to a working node, tap the connect button in the lower-right corner, and confirm that the VPN icon appears at the top.
- Long-press the node, select “Test current configuration connectivity” or a similar test option, and check whether it times out.
- If you’re using free nodes from this site, try testing nodes from different regions and using different protocols.
If the test fails, first suspect that the node is no longer working, its port is blocked, or the subscription hasn’t been refreshed. Don’t keep reinstalling the app—instead, try another node first.
2. Check your IP and network environment
v2rayNG connections depend on your phone’s current network environment. If the same node doesn’t work over Wi-Fi but works on mobile data, the issue may be with your local network or carrier restrictions.
- Turn Airplane mode off and back on to get a new local network IP.
- Test both Wi-Fi and mobile data.
- Disable network restrictions from other VPNs, accelerators, or battery-saving apps.
- If you can’t connect on a campus or company network, try your home network or a mobile hotspot.
Once connected, visit an IP lookup website to see whether your public IP has changed. If the VPN icon is visible but your IP hasn’t changed, the proxy probably isn’t actually working, so check the routing mode.
3. DNS settings can also affect website access
Sometimes v2rayNG shows that it’s connected, but websites won’t open in the browser. A common cause is a DNS resolution issue. In v2rayNG’s “Settings,” check whether options such as local DNS and routing rules are enabled. Most users should start with the default settings and avoid changing complex rules without a reason.
If you’ve changed your DNS settings before, try restoring the defaults or disabling manual DNS in your phone’s Wi-Fi settings. If some websites open while others don’t, the cause may also be the DNS cache, routing rules, or the browser’s Secure DNS.
4. Troubleshoot the browser environment
Some users think v2rayNG has failed when the real cause is a browser extension, cache, or Secure DNS setting. Test the following in order:
- Try visiting the site in different browsers, such as Chrome, Edge, and Firefox.
- Turn off “Secure DNS” and “Enhanced protection” in the browser, then try again.
- Clear the browser cache or open the page in incognito mode.
- Don’t enable other proxy extensions at the same time, as they can conflict.
If Telegram or the YouTube app works but websites won’t open in your browser, the issue is probably with the browser environment. If no apps work, go back to checking the node, network, and DNS.
5. What to do if you still can’t connect
We recommend following this order: “Update subscription → switch nodes → switch networks → restore DNS settings → try another browser → restart your phone.” Don’t uninstall v2rayNG right away, or you may lose your configuration. If you imported a subscription link, make sure it doesn’t contain extra spaces and that your phone’s time is set to sync automatically. Most connection issues can be pinpointed using these steps. The key is to distinguish between node, local network, DNS, and browser issues.